EFFECT OF POOR MAINTENANCE STUDIO EQUIPMENT AND THE PRACTICE

CHAPETR ONE

1.0   INTRODUCTION 

1.1        Background of the study

1.2        Statement of problem

1.3        Objective of the study

1.4        Research Hypotheses

1.5        Significance of the study

1.6        Scope and limitation of the study

1.7       Definition of terms

1.8       Organization of the study

CHAPETR TWO

2.0   LITERATURE REVIEW

CHAPETR THREE

3.0        Research methodology

3.1    sources of data collection

3.3        Population of the study

3.4        Sampling and sampling distribution

3.5        Validation of research instrument

3.6        Method of data analysis

CHAPTER FOUR

DATA PRESENTATION AND ANALYSIS AND INTERPRETATION

4.1 Introductions

4.2 Data analysis

CHAPTER FIVE

5.1 Introduction

5.2 Summary

5.3 Conclusion

5.4 Recommendation

Appendix

 

 

 Abstract

This study is on effect of poor maintenance studio equipment and the practical.  The total population for the study is 200 student of department of communication art University of Nsukka, Enugu state. The researcher used questionnaires as the instrument for the data collection. Descriptive Survey research design was adopted for this study. A total of 133 respondents made final year students, year three students, year two students and year one students were used for the study. The data collected were presented in tables and analyzed using simple percentages and frequencies

 

 

 

 

 

 

 

 CHAPTER ONE

INTRODUCTION

• Background of the study

The issue of poor maintenance culture as it affects tools and equipment used in art production in tertiary institutions in Nigeria cannot be over emphasized. It is a poor attitudinal behaviour which has eaten deep into the social fabric of the Nigerian people. It manifests in different aspects of the industrial life of the people. Most institutions of higher learning where Art is taught lack adequate infrastructure facilities and equipment for effective teaching and learning of art. Some of the institution that could boast of some  facilities and equipment, have them in their dilapidated conditions were as a result of carelessness handling by student artists poor maintenance culture and total negligence on the part of departmental studio managers. This attitude to Art studio materials, equipment and machineries is in line with the general attitude prevailing within the nation. A visit to various ministries such as works and Housing: Agriculture citic will reveal sorry site of abandoned tractors, vehicles and other heavy equipment and machineries which otherwise would have been put to effective use in the pursuit of the objectives and goals of such ministries. It is not surprising therefore that professor Adesing Oladapo Aderisigbe of Obafemi Awolowo Uinversity Ile Ife would lament over inadequate funding in the faculty of Agriculture which has resulted in the abandonment of many of the facilities and equipment of the faculty for decades. (Kehinde Adio, 2005). The abandonment must have been as a result of their functional state which in most cases must have been as a result of poor maintenance. Writing on the collapsed Nukkei bridge in, Jalingo Taraba  state, David Molomo (2005) quoted Alhaji Abubarka (Deputy Governor) is attributing the collapse of the bridge to poor structure and maintenance.  Within the premises of the campus 2 of the Institute Of Management and Technology Enugu would be found a good number of water tankers, pail loader,  and other vehicles which have been abandoned in a state of despair. At the industrial center would also be found, equipment for various productions which have not been assembled or have been allowed to rust. According to  the Head of work and services department the institute lacks the necessary fund to put these vehicles and equipment back to life – hence their abandonment. From the foregoing it is discovered that lack of fund is one of the major factors responsible for the poor maintenance culture that is prevailing within the Nigeria system. Another major factor to consider is non availability of the required technical knowhow. Most staff within the ministries, display lack of technical competence in the handling of machine and other working equipment. Where there are competent hands, surely maintenance cost would be reduced as the required repairs parts would be procured and repairs effected without engaging “experts” whose services would be very exorbitant. Reporting on the repair being carried out on the Niger bridge, Nwabueze Okonkwo of Saturday sun pointed out that the Commissioner for works lamented that lack of maintenance culture which has affected the bridge since 1962.   Architectural structures also suffer similar fate. There are reports of such collapsed buildings all around the country in recent times. Poor maintenance culture has been the bane of our country which is having very adverse effect on national growth and development.

1.2 STATEMENT OF THE PROBLEM

Most art studio in institutions of higher learning have facilities for the teaching and practice of art but because of their conditions many of them are not functional this situation has affected student artist especially those who are specializing in ceramics. Because of financial constraints facing management, money is not readily available to repair such equipment like electric potter’s wheels, kick wheels, kilns, ball mill, blunger, and other higher equipment like pugmill and compressors. For lack of fund, electrical and mechanical experts cannot be consulted to effect repairs on these broken down equipment to this end, what is expected of the student artist whose progress in training depend on the availability of such tools and equipment.

1.3 OBJECTIVE OF THE STUDY

The objectives of the study are;

1. To ascertain the effect of poor maintenance studio equipment and the practice
2. To identify the possible ways art student can organize themselves through costless self help project to undertake effective repairs of broken down equipment and machineries in the art studio of their institutions that aid their training
3. To ascertain the relationship between poor maintenance studio equipment and student academic performance
4. To ascertain the relationship between poor maintenance studio and practical experience of student

1.4 RESEARCH HYPOTHESES

For the successful completion of the study, the following research hypotheses were formulated by the researcher;

H₀: there is no effect of poor maintenance studio equipment and the practice

.H₁: there is effect of poor maintenance studio equipment and the practice

H₀²: there is no relationship between poor maintenance studio equipment and student academic performance

H₂: there is relationship between poor maintenance studio equipment and student academic performance.

1.5 SIGNIFICANCE OF THE STUDY

The significance of this project is the new dimension it introduces in the study of art. Under this new dimension, students have the opportunity to study and understand the design and mode of operation of the tools, equipment and machinery that are used in art production particularly with reference to one’s area of specialization. In this regard the art student will not see his working tool or equipment as object whose production is beyond his scope of knowledge and understanding. This approach place the art student in a position of great advantage like the driver/ mechanic. He or she will be asked to overcome problems associated with production within the studio or the industry.

1.6 SCOPE AND LIMITATION OF THE STUDY

The scope of the study covers effect of poor maintenance studio equipment and the practice. The researcher encounters some constrain which limited the scope of the study;

1. a) AVAILABILITY OF RESEARCH MATERIAL: The research material available to the researcher is insufficient, thereby limiting the study
2. b) TIME: The time frame allocated to the study does not enhance wider coverage as the researcher has to combine other academic activities and examinations with the study.
3. c) Organizational privacy: Limited Access to the selected auditing firm makes it difficult to get all the necessary and required information concerning the activities.

1.7 DEFINITION OF TERMS

POTTERS WHEEL: Machine designed to help potters to produce circular forms from a lump of plastic clay place on it revolving wheel head. This machine could be powered manually by kicking a pedal with the foot or by electric motor.

THROWNG:     A method of producing ceramic form in which a lump of clay placed on a revolving wheel head is manipulated with the fingers to become cylindrical and consequently give the desired shape of a flower vase, or mug or cup or bowl.

WHEEL HEAD:   This is a flat round metal disk which usually revolves on a vertical shift on which clay lumps are place for the production of cylindrical clay forms.

CERAMICS TOOLS: It is a light hand instrument used in preparing and extracting clay; on dealing forms, smoothening; felting and decorating clay ware.

CERAMIC EQUIPMENT:  ALL heavy duty machinery used in ceramic production such as kiln, potter’s wheel, pug mill, ventilation both spraying machine, spray gun, etc.

1.8 ORGANIZATION OF THE STUDY

This research work is organized in five chapters, for easy understanding, as follows

Chapter one is concern with the introduction, which consist of the (overview, of the study), historical background, statement of problem, objectives of the study, research hypotheses, significance of the study, scope and limitation of the study, definition of terms and historical background of the study. Chapter two highlights the theoretical framework on which the study is based, thus the review of related literature. Chapter three deals on the research design and methodology adopted in the study. Chapter four concentrate on the data collection and analysis and presentation of finding.  Chapter five gives summary, conclusion, and recommendations made of the study

₦5,000.00 – DOWNLOAD FULL PROJECT DOWNLOAD FULL PROJECT Added to cart

---

---

---

---

Related Project Topics :